Two Brothers Racing Honda CBR1000RR - Manual (Page 5)

ITBR001-181 2006-07 Honda CBR1000RR - 5
Figur
e
G
Figur
e
H
Fi
gur
e I
TPS connector
stock connectors
Juice Box Pro
connectors
15 Locate the throttle position sensor (TPS) connector.
This connector is located on the left hand side of the throttle bodies as shown in
Figure G.
16 Unplug the TPS connector from the throttle bodies.
17 Attach the TPS connectors from the Juice Box Pro to the throttle bodies and the
stock wiring harness as shown in Figure H.
18 Secure the Juice Box Pro in the tail section as shown in Figure I.
Note:It is not necessary to use the supplied velcro unless desired. Make sure to
clean both surfaces with the alcohol swab before attaching.
19 Reinstall the left hand side mid fairing.
20 Reinstall the rear tail section bolts. Refer to Figure A.
21 Replace the fuel tank cover.
22 Reinstall the passenger seat and main seat.