Two Brothers Racing Honda CBR1000RR User Manual
Page 3
iTBR001-206
2008-09 Honda CBR1000RR - 3
Fi
gu
re
A
Fi
gur
e B
Fi
gu
re
C
unplug
unplug
unplug
The ignition must be turned OFF before installation.
1
Remove the main seat and the passenger seat.
2
Remove the fuel tank cover.
3
Lift the fuel tank up or remove.
4
Using the supplied velcro, secure the Juice Box Pro in the tail section.
Make sure to clean both surfaces with the alcohol swab before attaching.
5
Route the Juice Box Pro harness down the left side of the bike.
6
Unplug the stock wiring harness from the #1 and #4 lower injectors as shown in
Figure B.
The lower injectors are located on the throttle bodies.
7
Unplug the sub-connector from the lower throttle bodies as shown in Figure B.
8
Attach the Juice Box Pro connectors to the stock wiring harness and the throttle
body as shown in Figure C.