Two Brothers Racing Kawasaki ZX-10R User Manual

Page 3

Advertising
background image

ITBR001-199

2008-10 Kawasaki ZX10R - 3


Fi

gu

re

A

Fi

gur

e B

Fi

gu

re

C

remove cover

Juice Box Pro

harness

unplug

The ignition must be turned OFF before installation.

1

Remove the main seat and the passenger seat.

2

Remove the covers for each side of the fuel tank as shown in Figure A.

3

Prop the front of the fuel tank up.

4

Slide the junction box under the main seat from it’s rubber sleeve.

This will allow room for the Juice Box Pro harness.

5

Route the Juice Box Pro wiring harness underneath the sub frame crossover as
shown in Figure B.

6

Unplug the brown 16-pin main wiring harness connector from the throttle bodies as
shown in Figure C.

This connector is located under the fuel tank on the right hand side of the bike.

Advertising