Two Brothers Racing Suzuki B-King User Manual
Page 3
ITBR001-195
2008-10 Suzuki BKing - 3
Fi
gu
re
A
Fi
gur
e B
Fi
gu
re
C
Juice Box Pro
harness
Juice Box Pro
harness
Juice Box Pro
harness
remove bolt
unplug
unplug
The ignition must be turned OFF before installation.
1
Remove the main seat and the passenger seat.
2
Using the prop rod located in the trunk area, hold the front of the fuel tank up.
3
Lay the Juice Box Pro in the tail section.
4
Route the Juice Box Pro harness down the left hand side of the bike towards the
throttle bodies.
5
At the ECU, route the Juice Box Pro harness underneath the left hand frame spar as
shown in Figure A.
6
Remove the bolt holding the tool kit box to the frame as shown in Figure B.
This allows the Juice Box Pro harness to be routed behind this bracket.
7
Unplug the stock wiring harness from each injector as shown in Figure C.