Two Brothers Racing 2007-08 Suzuki GSXR1000 User Manual
Page 4
ITBR001-178
2007-08 Suzuki GSXR1000 - 4
Fi
gu
re
D
Fi
gu
re
E
Fi
gu
re
F
unplug TPS
connector
grey wire from
Juice Box Pro
8
Attach the connectors from the Juice Box Pro to the stock injectors and stock
connectors as shown in Figure D.
Note:Do not connect the Juice Box Pro connectors to the upper injectors. Verify you
are on the set of injectors that is below the fuel rail.
• orange wire connects to cylinder 1
• yellow wire connects to cylinder 2
• green wire connects to cylinder 3
• blue wire connects to cylinder 4
9
Unplug the throttle position sensor (TPS) connector as shown in Figure E. This will
allow easier access to the wires.
10 Crimp the supplied wire tap to the pink/black wire as shown in Figure F.
11 Attach the grey wire from the Juice Box Pro to the wire tap as shown in Figure F.
Note:It is recommended to use dielectric grease on these connections.
12 Attach the TPS connector to the TPS.
13 Using the supplied velcro, secure the Juice Box Pro in the tail section.
Make sure to clean both surfaces with the alcohol swab before attaching.
14 Lower the fuel tank back into place.
15 Reinstall the seats.