Two Brothers Racing Yamaha R6 User Manual
Page 4
Advertising
ITBR001-212
2008-10 Yamaha R6 - 4
Fi
gu
re
D
Fi
gu
re
E
Fi
gu
re
F
ground
wire
7
Attach the ground wire from the Juice Box Pro to the negative side of the battery as
shown in Figure D.
8
Using the supplied posi-tap, attach the grey wire from
the Juice Box Pro to the blue wire of the ECU as shown
in Figure E.
This wire is from the smaller of the two ECU
connectors in position 5.
Note:The wire location is numbered on the back of the
connector.
9
Using the supplied velcro, secure the Juice Box Pro in the tail section of the bike as
shown in Figure F.
Make sure to clean both surfaces with the alcohol swab before attaching.
It is recommended to route the Juice Box Pro harness underneath the sub-frame
bracket.
Advertising