Two Brothers Racing Yamaha R6S User Manual
Page 3
ITBR001-22S
2006-09 Yamaha R6S - 3
Fi
gu
re
A
Fi
gur
e B
Fi
gu
re
C
Juice Box Pro
harness
Juice Box Pro
harness
ground wire
Juice Box Pro
harness
unplug
unplug
The ignition must be turned OFF before installation.
1
Remove the main seat and the passenger seat.
2
Prop the front of the fuel tank up.
3
Remove the rubber plug in the tail section near the tool kit.
4
Lay the Juice Box Pro in the tail section.
5
Route the Juice Box Pro harness through the hole and down the right side of the
bike as shown in Figure A.
6
Route the Juice Box Pro harness under the cross member for the subframe as shown
in Figure B.
7
Attach the ground wire from the Juice Box Pro to the negative side of the battery as
shown in Figure B.
8
Unplug the two 6-pin connectors from the throttle bodies as shown in Figure C.
One connector is black and the other connector is clear.