Two Brothers Racing Yamaha R1 User Manual
Page 3
iTBR001-174
2007-08 Yamaha R1 - 3
Fi
gu
re
A
Fi
gur
e B
Fi
gu
re
C
Juice Box Pro
harness
fuel tank bracket
unplug
Juice Box Pro
connectors
stock connectors
The ignition must be turned OFF before installation.
1
Remove the main seat.
2
Lift the front of the fuel tank up and use something to keep it propped up.
3
Route the Juice Box Pro harness down the right hand side of the bike.
4
Loosen the bolts securing the fuel tank bracket.
5
Route the Juice Box Pro harness underneath the fuel tank bracket as shown in
Figure A.
Once installation is complete, tighten the fuel tank bracket bolts.
6
Unplug the grey 12-pin connector from the throttle bodies to the main wiring
harness as shown in Figure B.
7
Attach the Juice Box Pro connectors to the stock connectors as shown in Figure C.
8
Verify these connectors do not interfere with the fuel line when the fuel tank is
lowered back into position.