Two Brothers Racing Yamaha R1 - Manual (Page 4)

ITBR001-238 2009-10 Yamaha R1 - 4
Fi
gu
re
D
Fi
gu
re
E
Fi
gu
re
F
unplug TPS
8 Attach the Juice Box Pro connectors to the throttle bodies and stock wiring harness
as shown in Figure D.
9 Unplug the wiring harness from the throttle position sensor (TPS) as shown in
Figure E.
The TPS connector is located on the left side of the throttle bodies underneath the
inner fairing that was removed earlier.
10 Using the supplied posi-tap, attach the grey wire from
the Juice Box Pro to the white wire of the TPS wiring
harness as shown in Figure F.
11 Attach the TPS back to the throttle bodies.