Fig.d, Fig.e, Fig.f – Two Brothers Racing Yamaha Zuma 125 User Manual
Page 4
Advertising
TBR001-247
Yamaha Zuma 125 - 4
4
Install the Juicebox Pro next to the battery (Fig. D).
5
Attach the ground wire from the Juicebox Pro to the negative side of the
battery.
6
Route the Juicebox Pro harness towards the engine following the stock
harness.
FIG.D
7
From the right side of the bike unplug the stock wiring harness (Fig. E).
The BLACK 4 pin connector is from the O2 sensor.
The BLACK 2 pin connector is from the injector.
FIG.E
8
Plug the harness from the Juicebox Pro in-line of the stock wiring harness
(Fig. F).
FIG.F
Ground wire
Advertising