Two Brothers Racing Kawasaki DR-Z110 - Manual

Description
Installation Instructions
IMPORTANT - PLEASE READ CAREFULLY
Warranty
Two Brothers Racing products are intended for closed course competition purposes only, and therefore
are sold “as is” without warranty. Two Brothers Racing specifically disclaims any warranties of
merchantability or fitness for a particular purpose and disclaims all responsibility for consequential and
incidental damages or any other losses arising from the use of these products or parts.
We recommend that this performance part be installed by a
qualified technician. If you have any doubts as to your ability
to install this performance part, please consult with your
local motorcycle dealer. Read all instructions first before
starting installation. Make sure the motorcycle and exhaust
system are completely cool before starting the installation.
Also, make sure the bike is secure on a centerstand or ideally
a service lift during installation. Be sure to save all stock
components for possible use later.
Allen Head Case/Side Cover Hardware Set
Kawasaki KLX110 & Suzuki DR-Z110
Part # 022-1-16
This hardware kit replaces the OEM phillips head screws
with stronger, stainless steel socket head cap screws.
6x35mm Socket Head Screws
Qty = 9
Clutch side
6x50mm Socket Head Screws
Qty = 5
6x75mm Socket Head Screws
Qty = 5
6x25 mm
6x45 mm 6x25 mm
6x45 mm
6x45 mm
Stator/Flywheel side
022-1-16
Qty. Description Part Number
6 6x25 Socket Head Cap Screws 005-SH625
9 6x35 Socket Head Cap Screws 005-SH635
3 6x45 Socket Head Cap Screws 005-SH645
5 6x50 Socket Head Cap Screws 005-SH650
5 6x75 Socket Head Cap Screws 005-SH675
1 Permatex Med. Strength Threadlock 031-P09178