Cisco 1503 User Manual

Page 38

Advertising
background image

Command Summary

Cisco Micro Hub User Guide

3-38

port operation

Syntax:

port-operation {hub id} {port id} {enable | disable}

Mode:

Administrator

Description:

Enables or disables any port on any hub in the stack.

Command Keyword Definitions

• hub id—Number used to identify the hub in a stack. An integer between 1

and 5. Read the section “Hub ID Numbers” earlier in this chapter for
information about how to determine hub ID numbers.

• port id—Number of the port on the hub, based on the yellow label on the

rear panel of the hub. A number from 1 to 8.

• enable—Enables the port.

• disable—Disables the port.

Advertising