Cisco 1503 - Manual (Page 15)

Using Your Hub Software 3-15
User Interface Commands
exit
help
Console Access Commands
Use the commands in this section to control console access to the hub configuration.
show console lockout info
Syntax: exit
Mode: Guest
Description: Exits any command mode or closes an active terminal session.
Syntax: help
Mode: Guest
Description: Refer to the previous section “System Help Commands” for more information
on the help command.
Syntax: show console-lockout info
Mode: Guest
Description: Displays information about the console lockout settings. The following
information is displayed:
• Status—Whether console lockout is enabled or disabled.
• Delay time—Length of time of no keyboard activity until console access to
the hub is locked.