40 camera, Back, 4 ^ take p film slack – Nikon fe2 User Manual
Page 11: Set the asa/iso film ' speed ring h, Basic operation, Continued
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BASIC OPERATION
—continued
40
camera
back.
Snap the camera back shut.
4 ^ Take p film slack.
“
*
“ Fold out the film rewind crank ®
and rotate it gently in the direction of the
arrow on the film rewind knob until you
feel a slight resistance. Then fold the
crank back in.
12
.
Lift up
rotate
dot ®
Make
dial
sential
meter
in use.
Set the ASA/ISO film
' speed ring h .
the ASA/ISO film speed ring and
it in either direction until the index
is opposite the film speed in use.
sure the exposure compensation
is set at 0. These actions are es-
to activate the camera’s exposure
for correct exposure of the film
Notes:
1) The film speed is printed on the film carton
and the cartridge itself.
2) If the exposure compensation dial is not at
0, refer to page 36 for details.
10