Nikon fe2/flash unit combination chart – Nikon fe2 User Manual
Page 51
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Nikon FE2/flash unit combination chart
Flash unit
Connection
Camera’s ready-light
indication
Shutter speed automatically
switched to 1/250 sec.
Usable flash modes
SB-21A
Via AS-6 coupler
Provided
Yes
Manual
SB-21 B
Direct
Provided
Yes
TTL, manual
SB-20
Direct
Provided
Yes
TTL, auto, manual
SB-19
Direct
Provided
Yes
Auto
SB-18
Direct
Provided
Yes
TTL, manual
SB-17
Via AS-6 coupler
Provided
Yes
Auto, manual, MD
SB-16A
Via AS-6 coupler
Provided
Yes
Auto, manual, MD
SB-16B
Direct
Provided
Yes
TTL, auto, manual, MD
SB-15
Direct
Provided
Yes
TTL. auto, manual, MD
SB-11/14/140
Via SC-11 sync cord (provided)
Not provided
No
Auto* **, manual
Via SC-13 sensor remote cord
Provided
Yes
Auto**, manual
Via SC-23 TTL remote cord
Provided
Yes
TTL**, manual
SB-12
Via AS-6 coupler
Provided
Yes
Manual
SB-10
Direct
Provided
Yes
Auto, manual
SB-7E
Via AS-2 coupler
Not provided
No
Auto, manual
SB-6
Via SC-6 sync cord
Not provided
No
Manual
Via AS-2 coupler with SC-9
extension cord (with SU-1)
Not provided
No
Auto, manual
SB-E
Direct
Provided
Yes
Auto
Ringlight Unit
SR-2
Via sync cord (provided)
Not provided
No
Manual
Macro Ringlight
Unit SM-2
Via sync cord (provided)
Not provided
No
Manual
Medical-Nikkor
120mm f/4 IF
Via 2-pin sync cord SC-20 (provided)
Not provided
No
*
Via 3-pin sync cord SC-22 (provided)
Provided
Yes
* ★
* Flash output is determined by the lens’ ASA/ISO ring setting. The focusing ring is coupled to the diaphragm, so as the lens is focused, the aperture
is simultaneously set to provide the correct exposure.
With SB-140, usabie only for visible-light flash photography.
49