Nikon fe2 User Manual
Page 63
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Clean metallic parts with a
blower brush or with a soft dry
cloth.
Clean glass surfaces such as
the lens or the finder eyepiece
with a blower brush; avoid
using lens tissue as much as
possible.
Gently
wipe
dirt,
smudges, or fingerprints with
soft cotton moistened with a
small amount of absolute al
cohol, using a spiral motion from
center to periphery. Make sure
you leave no wiping traces.
Caution
Please note that the use of a spray-gun type blower to clean the lens
may cause possible damage to the glass (especially when ED glass is
used for the front lens element), by suddenly lowering the temperature
on the lens surface. To avoid damage, hold the blower upright, keep its
nozzle more than 30cm away from the tens surface and move the nozzle
around so that the stream of air is not concentrated in one spot.
In a humid environment, it is
best to store the camera in a
vinyl bag with a desiccant to
keep away dust, moisture and
salt.
Note that storing leather cases
in a vinyl bag may cause the
leather to deteriorate, so exer
cise due care.
61