G install the film cartridger, Insert the film leader in the takeup spool m, O engage the film’s – Nikon fe2 User Manual
Page 9: Perforations with the sprocket teeth, Basic operation, Continued
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BASIC OPERATION
—continued
g Install the film cartridger
Position the film cartridge in the
film cartridge chamber
(153
with the film
leader pointing towards the takeup spool,
and push the rewind knob back down to
secure the cartridge in place.
Notes:
1) You can use any 35mm film cartridge avail
able on the market.
2) Avoid loading film in direct sunlight. If there
is no shade available, turn your back to the
sun and use your own shadow to shield the
camera.
7
.
Insert the film leader in
the takeup spool
m
.
Pull the leader across the camera and in
sert it into any one of the slots in the
takeup spool.
O Engage the film’s
perforations with the
sprocket teeth .
Turn the takeup spool slightly with your
finger, so that the first or second perfo
ration at the bottom edge of the film is
engaged with the small tooth at the bot
tom of the slot in the takeup spool and the
top and bottom perforations mesh se
curely with the film sprockets.
8