Canon EOS D60 - Manual (Page 105)

Protecting an Image
You can erase-protect images to prevent accidental erasure.
You can press the <HA> button to switch between single-image and index display in order to
protect individual pictures.
From the menu, select [Protect],
Press the <MENU> button.
Turn the <0> dial to select [Protect].
Open the Protect Settings screen.
Press the <0> button.
The display goes to the Protect Settings
screen.
® Press the <HA> button to show the
Protect Settings screen on an index display,
then press the <BJA> button again to show
the Protect Settings screen on a single
image display.
The < e ;> icon
Protect the image.
# Turn the <0> dial to select the image you
want to protect, then press the <@>
button.
Protected images are identified with a <i^>
icon.
# Press the <0> button again to cancel
protection and delete the <E> icon.
@ If you have other images to be protected,
repeat the above steps.
# Press the <MENU> button to exit Protect
mode.
0)
id '
CQ
01
Z3
Q.
m
—1
0)
w
CQ
73
CD
O
O
Q.
0
Q.
Once an image is protected, it cannot be removed by the camera’s Erase function.
To erase a protected image, you must first remove the protection.
o
CQ
0
CO
If you protect the images you need and erase all the images at once (^104), all
non-protected images will be erased. This is handy when you want to erase all the
images you do not need at once.
103