Replacing the date/time battery – Canon EOS D60 User Manual
Page 115
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Replacing the Date/Time Battery
When the date/time back-up battery level is low, T bC” will appear on the LCD panel. Replace
the CR2025 lithium battery as follows.
If you replace the backup battery while the camera is connected to a battery pack with power
remaining or to a DC coupler, the date, time, and other menu functions will retain their settings.
Set the Main Switch to <OFF>.
Open the date/time battery cham
ber cover by turning it 45 degrees
counterclockwise, as shown by
the arrow in the diagram.
@ Be careful not to rotate the cover more than
45 degrees.
Take out the old battery.
With the camera bottom facing downward,
push in the edge of the battery to take it
out.
Install a new battery.
The plus side of the battery must face
upward.
Close the cover by turning it
clockwise, as shown by the arrow.
® If the date and time now displayed in the
LCD panel are incorrect, you will need to
set them. (^34)
5
]□
CQ
Û)
13
CL
m
—i
0)
CO
a'
CQ
0
o
o
—i
Q.
0
Q.
3
Û)
CQ
0
Crt
(I
For the date/time battery, be sure to use a CR2025 lithium battery.
113