Canon EOS D60 - Manual (Page 78)

Autoexposure Bracketing
When using autoexposure bracketing, the camera automatically changes the exposure level within
the set range (up to +/-2 stops in 1/2-stop increments) for three successive frames. This is called
AEB (Auto Exposure Bracketing). The three bracketed shots are exposed in the selected drive mode
(->•63) in the following order: correct exposure, decreased exposure, and increased exposure.
Standard exposure (0) Decreased exposure (-1.0) Increased exposure (-i-I.O)
Quality Large M
Red-eye on/off Off
n—P t—
ISO Spe
LCD murai
Beep
Custom Vffl
‘2.1 1 . Z'*' : Correct exposure
-2.1.^.1.2+ : Decreased
■ exposure
■2.1 .dJ.1.2+ : Increased
■ exposure
Canceling AEB
From the menu, select [AEB].
® Press the <MENU> button.
® Turn the <0> dial to select [AEB], then
press the <©> button.
Set the AEB level.
Turn the <0> dial to set the AEB level you
want, then press the <@> button.
# The AEB setting is entered, and the display
returns to the Menu.
® Press the <MENU> button to clear the
screen and exit the menu.
Take the picture.
'»«* The bracketing sequence will be standard exposure,
decreased exposure, and increased exposure.
The pictures will be taken in the drive mode currently
set. (^63)
® When using continuous shooting, press and hold the
shutter button down fully to take all three bracketed
shots continuously, and then stop automatically.
€1 When using AEB with the self-timer, the camera
takes the three bracketed shots in succession after
the 10-second timer delay.
® Follow steps 1 and 2 to set the AEB level to
<®>.
fi AEB will be automatically cancelled when
the Main Switch is set to <OFF>, the lens is
changed, the flash is charged, the battery
pack or the CF card is replaced.
78