Select the parameter to be set, Set the desired parameter setting, Go back to step 1 – Canon EOS D60 User Manual
Page 53: Select the desired set number
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
IMm
Setting Processing Parameters
Select the parameter to be set.
Turn the <0> dial to select the parameter,
then press <@>.
The parameter selection will change in the
following loop:
[Contrast]
i
[Sharpness]
t
[Saturation]
t
[Color tone]
Set the desired parameter setting.
! Turn the <0^ dial and select [-], [0], or [+].
Then press <@> .
Go back to step 1.
Press the <MENU> button twice to return to
step 1, then press <@>.
>
Q.
<
0)
13
o
0
Q.
O
T3
0
—1
0
o'
o
(/>
Parameters
Protect
Rotate
Select the desired set number.
@ Turn the <0> dial and select [Set 1], [Set
2], or [Set 3]. Then press < @>.
C9S3
You can set the processing param eter by pressing <@ > and turning the <£S> or
<0> dial while looking at the LCD panel. (C.Fn-12-3->126)
53