Setting processing parameters, From the menu, select [parameters, Select [set – Canon EOS D60 User Manual
Page 52: Select the desired set number
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting Processing Parameters
Contents of processing for the captured image (parameters: [contrast], [sharpness],[saturation]
and [color tone]) can be set with the camera, and you can set and register up to three sets of
parameters. Defaut setting is “standard” (0 for all parameters).
Parameter
Setting
Level
Effect
Contrast
Adjusts the
contrast
- (Low)
Takes pictures with lower contrast.
0 (Standard) Takes pictures with normal contrast.
+ (High)
Takes pictures with higher contrast.
Sharpness
Adjusts the
sharpness
- (Low)
Takes pictures with lower sharpness.
0 (Standard) Takes pictures with normal sharpness.
+ (High)
Takes pictures with higher sharpness.
Saturation
Adjusts the
color saturation
- (Low)
Takes pictures with muted colors.
0 (Standard) Takes pictures with normal color saturation.
+ (High)
Takes pictures with intense colors.
Color tone
Adjusts the color
balance
- (Red)
Makes skin tones look more reddish.
0 (Standard) A standard color balance is applied.
+ (Yellow)
Makes skin tones look more yellowish.
ISO speed 100
From the menu, select [Param
eters].
® Press the <MENU> button.
# Turn the <0> dial to select [Parameters],
then press the <@)> button.
Select [Set].
Turn the <0> dial to select [Set up], then
press <@>.
# By default. Sets 1 to 3 have all the param
eters set to 0 (Standard).
Select the desired set number.
Turn the <0> dial and select Set [1], Set
[2], or Set [3].Then press <@>.
52