Selecting a drive mode, Press the <drive> button. (c)6), Select the drive mode – Canon EOS D60 User Manual
Page 63
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Selecting a Drive Mode
You can set the EOS D60’s drive mode to single-frame shooting, continuous shooting or self-
timer operation.
Single-frame shooting < □ >: Press the shutter button to take one image.
Continuous shooting <Q|>: You can use the continuous shooting mode by pressing and
holding the shutter button.
cS) Self-timer operation:
When you press the shutter button, the picture will be taken
about 10 sec. later. (->-81)
Size/Quality
LM Large/Fine
LJ Large/Normal
UM Medium/Fine
^j| Medium/Normal
Small/Fine
S
j
I Small/Normal
RAW
Maximum number of images
(Approx, images/sec.)
Max. Burst During Continuous Shooting
(Approx, images)
ONE SHOT
Al SERVO
ONE SHOT Al SERVO
3
2.5
8
© The figures above are based on Canon’s testing standards (at 1/250 sec. or faster and ISO
100
) .
Press the <DRIVE> button. (C)6)
>
Q.
<
03
13
o
0
CL
O
TD
0
—1
0
r—t»
o'
o
0
Select the drive mode.
' Look at the LCD panel as you turn the
<£a>or<0>dial.
n : Single-frame shooting
i
Qi : Continuous shooting
I
& : Self-Timer Operation
<1^
® Press the shutter button down halfway to
return to ready-to-shoot mode.
If the CF card’s remaining capacity is enough for less than 8 images, continuous
shooting might not be possible.
63