Connecting to a tv, Open the cover, Connect the cable – Canon EOS D60 User Manual
Page 114: Turn the tv on, and set the input, Switch to video in, Set the main switch to <on, Press the <h> button
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting to a TV
You can connect the EOS D60 to a television (using the video cable provided with your
camera) to display your recorded images. Always turn off the camera and the television before
connecting or disconnecting them.
Open the cover.
Connect the cable.
@ Connect the cable to the VIDEO OUT
terminal on the camera and to the video
input terminal on the TV.
® Insert the cable plug all the way, until it
clicks into place.
Turn the TV on, and set the input
switch to Video In.
Set the Main Switch to <ON>.
Press the <H> button.
The image appears on the TV screen.
You can use the TV to view images or make
menu settings just as you would do with the
LCD monitor.
# When you finish, set the Main Switch to
<OFF>, turn the TV off, then disconnect the
video cable.
(I
If the camera is set to the wrong video system format (->121), you will not see a
proper image on the TV set. Make sure the camera is set to the video system
format (NTSC or PAL) compatible with the TV set.
- - Using a DC coupler is recommended. (->26)
«. Images and menus do not appear on the LCD monitor while the video cable is
connected to the camera.
; / You can also switch the TV video signal to PAL (->121). The default setting is for
the NTSC signal standard.
1 1 2