Using a household power supply, Connect the dc coupler, Place the cord in the groove – Canon EOS D60 User Manual
Page 26: Insert the dc coupler into the camera, Connect the power cord
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Inserting and Removing the Battery Pack
Using a Household Power Supply
You can operate the EOS D60 from a household power outlet by using the DC coupler. This
enables you to use the camera as long as you like without a battery.
Connect the DC coupler.
® Plug the DC coupler into the compact
power adapter.
Place the cord in the groove.
^ Carefully insert the cord into the groove.
Insert the DC coupler into the
camera.
# Open the cover (-^24) and lower the
covering on the cord hole.
® Insert the DC coupler and fit the cord into
the cord hole.
@ Check that the cord is placed tightly in the
cord hole, and slide the DC coupler into the
chamber until it locks into place.
® Close the cover so that it clicks into place.
Connect the power cord.
® Connect the power cord to the compact
power adapter.
® Plug the cord into a power outlet.
S When you are finished, remove the plug
from the power outlet.
O
C Do not use any DC coupler other than the one provided with your EOS D30 or
D60 camera.
... The DC Coupler cannot be used with cameras other than the EOS D30 and
D60.
26