Canon EOS D60 - Manual (Page 139)

REFERENCE
Shooting
Unable to shoot or
record images
CF card is not loaded correctly.
Load the CF card correctly. (^28)
CF card is full.
Change to a new CF card, or erase unwanted images. (-->28, 43,
104)
The battery pack is out of power.
Charge the battery pack. (->22)
Image out of focus (In-focus light in the viewfinder blinks).
Press the shutter button down halfway to focus again. If this fails,
focus manually. (->29, 59)
LCD monitor
displays and
images are hard to
see
Dust or foreign matter on the monitor.
=*» Clean the monitor with a soft eyeglass cloth.
LCD monitor is worn out.
Consult the store where you bought your camera, or a Canon
Service Center. (->10, back cover)
Images are blurred Lens focusing mode switch set to <iViF> (or <M>).
Set the focusing mode switch to <AF>. (->27)
Camera shake when the shutter button is pressed.
Press the shutter button carefully so that the camera does not shake.
(^29, 36)
Unable to use the
CF card
CF card data is corrupted.
»«* Format the CF card. (->105)
Use the specified type of CF card. (->2, 139)
The message
“r bC" appears on
the LCD panel
The date/time battery is exhausted.
«* Replace the battery with a new one. (->113)
Checking and Handling Images
Cannot erase
images Images may be protected,
a» Remove image protection. (->103)
Incorrect date and
time displayed
Date/Time setting may be incorrect.
Set date/time correctly. (->34)
No image appears
on the TV screen
Video cable plugs are not inserted fully.
Insert the video cable plugs firmly all the way. (->112)
The correct video format (NTSC or PAL) has not been set.
Set the camera to the correct video format to match the TV set.
(^112)
7)
CD
(S’
CD
O
CD
137