Canon EOS D60 - Manual (Page 67)

rom Custom White Balance Setting/LCD Panel Illumination
For best results, use subjects such as plain white paper for white balance basis.
White balance data is loaded from the partial metering zone (^17).
You can store white subjects photographed under various conditions on the CF
card, then select these images as needed for the [Custom WB] function as an
easy way of setting the ideal white balance for any lighting conditions.
The default setting for <cAa> is the same as the default setting for <#>.
LCD Panel Illumination
The LCD panel can be illuminated for about 4 sec. by pressing the <@> button. Pressing the
button again turns off the illumination.
After a picture is taken, the LCD panel illumination turns off automatically after 2 sec.
On the menu, select [LCD illumi.]
and set the LCD panel illumina­
tion.
® Press the <MENU> button.
€1 Turn the <0> dial to select [LCD illumi.],
then press <@>.
# Turn the <0> dial to select [On], then
press <@>.
“»The LCD panel illumination will be enabled,
and the menu will reappear.
® Press the <MENU> to quit the menu and
turn off the display.
>
Q.
<
03
13
o
CD
Q.
O
T D
CD
—1
03
o'
13
Cfl
Illuminating the LCD panel
# Press <@>.
# To turn off the illumination, press <©>
again.
ft
If you operate a button or dial for picture­
taking while the LCD panel is illuminated,
the illumination will continue. If you press a
menu or image playback button, the
illumination will turn off.
If C.Fn-12-1/2/3 has been set, pressing <©> will not turn off the LCD panel
illumination (it will turn off automatically).
If you take a picture while the LCD panel is illuminated, the illumination will
continue as you shoot.
LCD panel illumination works in all shooting modes.
67