Detex V50 EE User Manual
Page 10
Advertising
104832 Page 10
Slide and mount endcap
to endcap bracket with two
1/4-20x1" PPH machine screws
or #14 self-drilling screws.
DO NOT OVERTIGHTEN
For 1/4-20 machine screws drill #7 holes.
For #14 self-drilling screws no pilot holes
necessary. For sex nuts drill 3/8" holes.
See HARDWIRE TRANSFER OPTIONS
IMPORTANT:
Install (2) 6-32 FH Screws
for added security
5
2
1
With pushpad assembly level,
secure the endcap bracket to door
by tightening the factory installed
self-drilling screw.
4
Slide fillerplate & endcap bracket into
extrusion & level pushpad assembly.
Note: Endcap Bracket must
bottom-out on extrusion. DO NOT
REMOVE NYLON SPACER ON
BACK OF BRACKET!
3
Advertising