EFCO 8800 Series Assembly Instructions Vol.5 - Manual (Page 26)

EFCO 2009 Page 26
Series 8700 / 8800 Unitized Curtain Wall Assembly Instructions - Volume 5
Section 22 - SSG Vent Unit Glazing at Fixed Horizontal : C. Adapter Installation
Insert HS32
setting blocks.
Slide WS00 gasket into
17A6 and apply 17A6 fin
bar to the horizontals.
Insert WA07 vent bulb
gasket into each jamb.
Slide WS00 gasket into
17A6 and apply 17A6 fin
bar to the horizontals.
VENT HEAD VENT SILL
VENT SILL VENT HEAD
Figure 32
VENT JAMB VENT JAMB
Figure 35 Figure 34
Figure 33
WA07 butts
into adapter.
WA07 butts
into adapter.
WA07 runs under
WS00 and butts
into adapter.
WA07 butts
into adapter.
WS00 gasket butts into
17A6 at the head
horizontal on each end.
WS00 gasket is cut 3”
short of the adapter at
the sill horizontal and is
centered in the opening.