EFCO 8800 Series Assembly Instructions Vol.5 - Manual (Page 34)

EFCO 2009 Page 34
Series 8700 / 8800 Unitized Curtain Wall Assembly Instructions - Volume 5
Section 23 - SSG Vent Unit Glazing at Stack Sill : C. Adapter Installation
Insert HS32
setting blocks. Insert WA07 vent bulb
gasket into each jamb.
Slide WS00 gasket into
17A6 and apply 17A6 fin
bar to the horizontals.
VENT HEAD VENT SILL
VENT SILL
VENT HEAD
Figure 49
VENT JAMB VENT JAMB
Figure 52 Figure 51
Figure 50
WA07 butts
into adapter.
WA07 runs under
WS00 and butts
into adapter.
WA07 butts
into sill.
WS00 gasket butts into
17A6 at the head
horizontal on each end.
WA07 butts
into sill.