ETS-Lindgren HI-4422 Field Probe (Archived) User Manual
Page 101
C
HARGING
I
NDICATORS
The following LEDs are located on the front of the battery charger:
•
POWER ON (green)—Indicates the battery charger is connected to the
AC power source.
•
NO BATTERY (amber)—Indicates the battery charger does not detect
a battery.
•
PENDING (amber)—Indicates the battery charger detects a battery.
Before fast charging can begin, the battery voltage must fall within
predetermined acceptable limits. A pulse-trickle charge is provided to
bring a depleted battery to a valid charge prior to fast charge.
•
CHARGING (amber)—Indicates the voltage pre-qualification condition
has been met, and fast charge has started.
•
COMPLETE (green)—Indicates a fast charging peak voltage is
detected. The probe can remain connected to the battery charger
indefinitely while in this maintenance mode.
Series H-491198-36 Battery Charger for NiCd Batteries
|
101
Archived 6/29/10
Use only the content for
HI-4422 in this manual.
Disregard content for
all other probe models;
see ETS-Lindgren
website for other
probe content.