ETS-Lindgren HI-4422 Field Probe (Archived) - Manual (Page 102)

S PECIFICATIONS
B ATTERY C HARGER S PECIFICATIONS
The H-491198-36 charger may be powered by standard line voltage (110–
240 Vac, 50–60 Hz) or by an optional automobile cigarette lighter plug
(12.5 Vdc).
Power
Main: IEC filtered AC power input module
110-240 VAC, 500 mA max,
50-100 Hz
Alternate: Automobile cigarette lighter to 2 mm
power plug adapter cord, 12.5 Vdc,
100 mA
Fuses: 250 volt, 1.0 Amp, Type T
(5 mm x 20 mm)
Output
Open Circuit Voltage: 15 Vdc
Fast Charge Pending Current: 60 mA
Fast Charge Current: 1400 mA
Pulsed Trickle Charge Current: 50 mA
Output Voltage (During Fast
Charge):
3–6 Vdc
NiMH Battery: • 3.6 volt 3 cell NiCd Battery,
1400 mAH (rapid charge cells,
1.2 volts/cell)
• ETS-Lindgren Part #491038
102 | Series H-491198-36 Battery Charger for NiCd Batteries
Archived 6/29/10
Use only the content for
HI-4422 in this manual.
Disregard content for
all other probe models;
see ETS-Lindgren
website for other
probe content.