ETS-Lindgren HI-4422 Field Probe (Archived) - Manual (Page 126)

Input Parameters: Case sensitive strings must be used.
char CommSettings
ASRL1::INSTR /Comm Port 1
Com1
Com2
etc.
char Family
HI-Any
FP-Any
HI-44xx MS
HI-6005 MS
HI-6005 HS
Laser HS
Virtual
In most cases HI-Any and FP-Any will communicate
with both HI and FP models. The exception is that
HI-Any must be used to communicate with laser
probe models and FP-Any must be used with the
FP2000-Series probe models.
Use HS types High Speed for higher sample rates.
The HI-44xx HS family does not return individual data
from each axis, but does increase the sample rate.
char name
Any user specified name
myProbe
Etc.
126 | ETSProbe DLL User Guide
Archived 6/29/10
Use only the content for
HI-4422 in this manual.
Disregard content for
all other probe models;
see ETS-Lindgren
website for other
probe content.