ETS-Lindgren HI-4422 Field Probe (Archived) - Manual (Page 110)

Probe
Description Probe Response
Command
D3 Read probe data :Dx.xxxyy.yyzzz.zB<CR>
• xxxx, yyyy, zzzz=
4-digit axis values with
floating decimal point
• B=battery flag, N or F
D5 Read probe data :Dx.xxxyy.yyzzz.zcccc.B<CR>
• xxxx, yyyy, zzzz=
4-digit axis values with
floating decimal point
• cccc=composite field value
with floating decimal point
• B=battery flag, N or F
I Identification command :I60XX<sr><sn><cd>B<CR>
• XX=specific probe model
• sr=10-character software
revision
• sn=8-character serial
number
• cd=8-character calibration
date
• B=battery flag, N or F
The Identification command, I, may also be used as the first command
sent. The command will turn on the laser. Once communication
between the probe and the Laser Data Interface (LDI) is established,
the return string will be sent. Subsequent I commands immediately
send the return string.
TC Read temperature in
Centigrade
:Txxxx.<CR>
110 | Operating Protocols
Archived 6/29/10
Use only the content for
HI-4422 in this manual.
Disregard content for
all other probe models;
see ETS-Lindgren
website for other
probe content.