ETS-Lindgren HI-4422 Field Probe (Archived) User Manual
Page 107
HI-61XX
S
ERIES
L
ASER
P
RO
F
IELD
P
ROBES
Probe
Command
Description
Probe Response
B<CR>
Read probe converter
voltage
:Bxx.xx<CR>
BP
Read probe converter
voltage in hexadecimal
format
:B64N
• N=safe operating level
• F=fail level
Voltage reported as 0–64;
64 corresponds to 100%
The BP command is provided for backward compatibility and should
not be used to monitor the converter voltage, which always responds
with :B64N<CR>.
Probe
Command
Description
Probe Response
D3
Read probe data
:Dx.xxxyy.yyzzz.zB<CR>
• xxxx, yyyy, zzzz=
4-digit axis values with
floating decimal point
• B=battery flag, N or F
D5
Read probe data
:Dx.xxxyy.yyzzz.zcccc.B<CR>
• xxxx, yyyy, zzzz=
4-digit axis values with
floating decimal point
• cccc=composite field value
with floating decimal point
• B=battery flag, N or F
Operating Protocols
|
107
Archived 6/29/10
Use only the content for
HI-4422 in this manual.
Disregard content for
all other probe models;
see ETS-Lindgren
website for other
probe content.