ETS-Lindgren HI-4422 Field Probe (Archived) - Manual (Page 34)

HI-6153 O PERATION
The HI-6153 assembly consists
of a pyramidal casing containing
the sensor, which is mounted on
one end of a shaft. The other
end of the shaft is attached to
an extrusion that houses the
electronics. The sensor and
electronics housing operate and
are calibrated as a unit.
The HI-6153 is a true 3-axis
probe. When requested, X, Y, Z,
and total field data can be
reported.
The HI-6153 can be used with
the HI-6100 Field Monitor. It can
also be connected to a personal
computer using an optional
HI-6113 Laser Data
Interface (LDI) and
ProbeView™ Laser software.
For a list and description of communication and information transfer protocols,
including command structure, probe commands, and HI-6113 commands, see
Appendix E: Operating Protocols on page 105.
34 | Laser-Powered Field Probes: HI-6153 Electric Field Probe
Archived 6/29/10
Use only the content for
HI-4422 in this manual.
Disregard content for
all other probe models;
see ETS-Lindgren
website for other
probe content.