ETS-Lindgren HI-4422 Field Probe (Archived) - Manual (Page 51)

HI-6053 O PERATION
The HI-6053 assembly consists of a
pyramidal casing containing the
sensor, which is mounted on one
end of a shaft. The other end of the
shaft is attached to an extrusion
that houses the electronics. The
sensor and electronics housing
operate and are calibrated as a
unit.
The HI-6053 is a true 3-axis probe.
When requested, X, Y, Z, and total
field data can be reported.
The HI-6053 can be used with the
HI-6100 Field Monitor or the
FM5004 Field Monitor. It can also
be connected to a personal
computer using an optional
HI-4413P Fiber Optic Modem or
HI-4413USB Fiber Optic to USB
Converter and ProbeView II™
software.
For a list and description of communication and information transfer protocols,
including command structure and probe commands, see Appendix E: Operating
Protocols on page 105.
Battery-Operated Field Probes: HI-6053 Field Probe | 51
Archived 6/29/10
Use only the content for
HI-4422 in this manual.
Disregard content for
all other probe models;
see ETS-Lindgren
website for other
probe content.