Kontron AT8404 CLI - Manual (Page 115)

AT8404 Switching Commands
Page 2 - 79 AT8404 CLI Reference Manual
2.15.4.1 no macfilter addsrc
This command removes a port from the source filter set for the MAC filter with the MAC address of <macaddr> and
VLAN of <vlanid>. The <macaddr> parameter must be specified as a 6-byte hexadecimal number in the format
of b1:b2:b3:b4:b5:b6. The <vlanid> parameter must identify a valid VLAN.
2.15.5 macfilter addsrc all
This command adds all interfaces to the source filter set for the MAC filter with the MAC address of <macaddr> and
<vlanid>. You must specify the <macaddr> parameter as a 6-byte hexadecimal number in the format of
b1:b2:b3:b4:b5:b6. The <vlanid> parameter must identify a valid VLAN.
2.15.5.1 no macfilter addsrc all
This command removes all interfaces to the source filter set for the MAC filter with the MAC address of <macaddr>
and VLAN of <vlanid>. You must specify the <macaddr> parameter as a 6-byte hexadecimal number in the
format of b1:b2:b3:b4:b5:b6.
The <vlanid> parameter must identify a valid VLAN.
2.15.6 show mac-address-table static
This command displays the Static MAC Filtering information for all Static MAC Filters. If you select <all>, all the
Static MAC Filters in the system are displayed. If you supply a value for <macaddr>, you must also enter a value
for <vlanid>, and the system displays Static MAC Filter information only for that MAC address and VLAN.
Mode Interface Config
Format no macfilter addsrc <macaddr> <vlanid>
Mode Interface Config
Format macfilter addsrc all <macaddr> <vlanid>
Mode Global Config
Format no macfilter addsrc all <macaddr> <vlanid>
Mode Global Config
Format show mac-address-table static {<macaddr> <vlanid> | all}
Mode Privileged EXEC
Term Definition
MAC Address The MAC Address of the static MAC filter entry.
VLAN ID The VLAN ID of the static MAC filter entry.
Source Port(s) The source port filter set's slot and port(s).