Kontron AT8404 CLI - Manual (Page 41)

AT8404 Switching Commands
Page 2 - 5 AT8404 CLI Reference Manual
2.1.8.1 no mtu
This command sets the default MTU size (in bytes) for the interface.
2.1.9 shutdown
This command disables a port.
2.1.9.1 no shutdown
This command enables a port.
2.1.10 shutdown all
This command disables all ports.
2.1.10.1 no shutdown all
This command enables all ports.
Format mtu <1518-9216>
Mode Interface Config
Format no mtu
Mode Interface Config
Note: You can use the shutdown command on physical and port-channel (LAG) interfaces, but not on
VLAN routing interfaces.
Default enabled
Format shutdown
Mode Interface Config
Format no shutdown
Mode Interface Config
Note: You can use the shutdown all command on physical and port-channel (LAG) interfaces, but
not on VLAN routing interfaces.
Default enabled
Format shutdown all
Mode Global Config
Format no shutdown all
Mode Global Config