Kontron AT8404 CLI - Manual (Page 252)

Utility Commands AT8404
AT8404 CLI Reference Manual Page 4 - 38
4.8.7.1 no host
This command removes the IP address of the DHCP client.
4.8.8 lease
This command configures the duration of the lease for an IP address that is assigned from a DHCP server to a DHCP
client. The overall lease time should be between 1-86400 minutes. If you specify infinite, the lease is set for 60
days. You can also specify a lease duration. Days is an integer from 0 to 59. Hours is an integer from 0 to 23.
Minutes is an integer from 0 to 59.
4.8.8.1 no lease
This command restores the default value of the lease time for DHCP Server.
4.8.9 network (DHCP Pool Config)
Use this command to configure the subnet number and mask for a DHCP address pool on the server. Network-
number is a valid IP address, made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid.
Mask is the IP subnet mask for the specified address pool. The prefix-length is an integer from 0 to 32.
4.8.9.1 no network
This command removes the subnet number and mask.
4.8.10 bootfile
The command specifies the name of the default boot image for a DHCP client. The <filename> specifies the boot
image file.
Format no host
Mode DHCP Pool Config
Default 1 (day)
Format lease [{<days> [<hours>] [<minutes>] | infinite}]
Mode DHCP Pool Config
Format no lease
Mode DHCP Pool Config
Default none
Format network <networknumber> [{<mask> | <prefixlength>}]
Mode DHCP Pool Config
Format no network
Mode DHCP Pool Config
Format bootfile <filename>
Mode DHCP Pool Config