Kontron AT8404 CLI - Manual (Page 244)

Utility Commands AT8404
AT8404 CLI Reference Manual Page 4 - 30
For TFTP, SFTP and SCP, the <ipaddr|hostname> parameter is the IP address or host name of the server,
<filepath> is the path to the file, and <filename> is the name of the file you want to upload or download. For
SFTP and SCP, the <username> parameter is the username for logging into the remote server via SSH.
Note: <ip6address> is also a valid parameter for routing packages that support IPv6.
Caution! Remember to upload the existing fastpath.cfg file off the switch prior to loading a new release
image in order to make a backup.
Table 1: Copy Parameters
Source Destination Description
nvram:backup-config nvram:startup-config Copies the backup configuration to the startup
configuration.
nvram:factory-settings nvram:current-
settings
Copies factory settings file to current settings file
nvram:factory-profile nvram:current-profile Copies factory profile file to current profile file
nvram:factory-config nvram:current-config Copies factory configuration file to current
configuration file
nvram:factory-all nvram:startup-all Copies all factory settings as configuration to be
used after reboot.
nvram:clibanner <url> Copies the CLI banner to a server.
nvram:current-settings <url> Contains configuration parameter
nvram:diag-report <url> Copies diagnostics result file to a server
nvram:errorlog <url> Copies the error log file to a server.
nvram:extra-profile <url> Contains customer specific configuration files. This
“tar.gz”-file will be unpacked in the “/”-directory
nvram:fastpath.cfg <url> Uploads the binary config file to a server.
nvram:log <url> Copies the log file to a server.
nvram:oslog <url> Copies the OS system log file to a server
nvram:script
<scriptname>
<url> Copies a specified configuration script file to a
server.
nvram:settings <url> Copies the file containing current settings to a
server
nvram:startup-config nvram:backup-config Copies the startup configuration to the backup
configuration.
nvram:startup-config <url> Copies the startup configuration to a server.
nvram:traplog <url> Copies the trap log file to a server.
system:running-config nvram:startup-config Saves the running configuration to nvram.
nvram:all-config <url> Uploads all relevant config files.
<url> nvram:clibanner Downloads the CLI banner to the system.
<url> pld Downloads and updates PLD firmware. This needs
time. While running some progress information is
displayed. The PLD update is active only after a
power-cycle.
<url> nvram:fastpath.cfg Downloads the binary config file to the system.