Kontron AT8404 CLI User Manual
At8404 cli reference manual advancedtca
Advertising
Table of contents
Document Outline
- Revision History
- Imprint
- Disclaimer
- About This Book
- Proprietary Note
- Trademarks
- Environmental Protection Statement
- Explanation of Symbols
- For Your Safety
- Two Year Warranty
- 1. Using the Command-Line Interface
- 1.1 Command Syntax
- 1.2 Command Conventions
- 1.3 Common Parameter Values
- 1.4 Slot/Port Naming Convention
- 1.5 Using the “No” Form of a Command
- 1.6 FASTPATH Modules
- 1.7 Command Modes
- 1.8 Command Completion and Abbreviation
- 1.9 CLI Error Messages
- 1.10 CLI Line-Editing Conventions
- 1.11 Using CLI Help
- 1.12 Accessing the CLI
- 2. Switching Commands
- 2.1 Port Configuration Commands
- 2.2 Spanning Tree Protocol (STP) Commands
- 2.2.1 spanning-tree
- 2.2.2 spanning-tree bpdufilter
- 2.2.3 spanning-tree bpdufilter default
- 2.2.4 spanning-tree bpduflood
- 2.2.5 spanning-tree bpduguard
- 2.2.6 spanning-tree bpdumigrationcheck
- 2.2.7 spanning-tree configuration name
- 2.2.8 spanning-tree configuration revision
- 2.2.9 spanning-tree edgeport
- 2.2.10 spanning-tree forceversion
- 2.2.11 spanning-tree forward-time
- 2.2.12 spanning-tree hello-time
- 2.2.13 spanning-tree max-age
- 2.2.14 spanning-tree max-hops
- 2.2.15 spanning-tree mst
- 2.2.16 spanning-tree mst instance
- 2.2.17 spanning-tree mst priority
- 2.2.18 spanning-tree mst vlan
- 2.2.19 spanning-tree port mode
- 2.2.20 spanning-tree port mode all
- 2.2.21 spanning-tree port-state
- 2.2.22 spanning-tree rootguard
- 2.2.23 show spanning-tree
- 2.2.24 show spanning-tree brief
- 2.2.25 show spanning-tree interface
- 2.2.26 show spanning-tree mst port detailed
- 2.2.27 show spanning-tree mst port summary
- 2.2.28 show spanning-tree mst summary
- 2.2.29 show spanning-tree summary
- 2.2.30 show spanning-tree vlan
- 2.3 VLAN Commands
- 2.3.1 vlan database
- 2.3.2 network mgmt_vlan
- 2.3.3 vlan
- 2.3.4 vlan acceptframe
- 2.3.5 vlan ingressfilter
- 2.3.6 vlan makestatic
- 2.3.7 vlan name
- 2.3.8 vlan participation
- 2.3.9 vlan participation all
- 2.3.10 vlan port acceptframe all
- 2.3.11 vlan port ingressfilter all
- 2.3.12 vlan port pvid all
- 2.3.13 vlan port tagging all
- 2.3.14 vlan protocol group
- 2.3.15 vlan protocol group add protocol
- 2.3.16 vlan protocol group remove
- 2.3.17 protocol group
- 2.3.18 protocol vlan group
- 2.3.19 protocol vlan group all
- 2.3.20 vlan pvid
- 2.3.21 vlan tagging
- 2.3.22 vlan association subnet
- 2.3.23 vlan association mac
- 2.3.24 show vlan
- 2.3.25 show vlan brief
- 2.3.26 show vlan port
- 2.3.27 show vlan association subnet
- 2.3.28 show vlan association mac
- 2.4 Double VLAN Commands
- 2.5 Voice VLAN Commands
- 2.6 Provisioning (IEEE 802.1p) Commands
- 2.7 Protected Ports Commands
- 2.8 GARP Commands
- 2.9 GVRP Commands
- 2.10 GMRP Commands
- 2.11 Port-Based Network Access Control Commands
- 2.11.1 authentication login
- 2.11.2 clear dot1x statistics
- 2.11.3 clear radius statistics
- 2.11.4 dot1x default-login
- 2.11.5 dot1x guest-vlan
- 2.11.6 dot1x initialize
- 2.11.7 dot1x login
- 2.11.8 dot1x max-req
- 2.11.9 dot1x max-users
- 2.11.10 dot1x port-control
- 2.11.11 dot1x port-control all
- 2.11.12 dot1x re-authenticate
- 2.11.13 dot1x re-authentication
- 2.11.14 dot1x system-auth-control
- 2.11.15 dot1x timeout
- 2.11.16 dot1x unauthenticated-vlan
- 2.11.17 dot1x user
- 2.11.18 users defaultlogin
- 2.11.19 users login
- 2.11.20 show authentication
- 2.11.21 show authentication users
- 2.11.22 show dot1x
- 2.11.23 show dot1x clients
- 2.11.24 show dot1x users
- 2.11.25 show users authentication
- 2.12 Storm-Control Commands
- 2.12.1 storm-control broadcast
- 2.12.2 storm-control broadcast level
- 2.12.3 storm-control broadcast rate
- 2.12.4 storm-control broadcast all
- 2.12.5 storm-control broadcast all level
- 2.12.6 storm-control broadcast all rate
- 2.12.7 storm-control multicast
- 2.12.8 storm-control multicast level
- 2.12.9 storm-control multicast rate
- 2.12.10 storm-control multicast all
- 2.12.11 storm-control multicast all level
- 2.12.12 storm-control multicast all rate
- 2.12.13 storm-control unicast
- 2.12.14 storm-control unicast level
- 2.12.15 storm-control unicast rate
- 2.12.16 storm-control unicast all
- 2.12.17 storm-control unicast all level
- 2.12.18 storm-control unicast all rate
- 2.12.19 storm-control flowcontrol
- 2.12.20 show storm-control
- 2.13 Port-Channel/LAG (802.3ad) Commands
- 2.13.1 port-channel
- 2.13.2 addport
- 2.13.3 deleteport (Interface Config)
- 2.13.4 deleteport (Global Config)
- 2.13.5 lacp admin key
- 2.13.6 lacp collector max-delay
- 2.13.7 lacp actor admin
- 2.13.8 lacp actor admin key
- 2.13.9 lacp actor admin state
- 2.13.10 lacp actor admin state individual
- 2.13.11 lacp actor admin state longtimeout
- 2.13.12 lacp actor admin state passive
- 2.13.13 lacp actor port
- 2.13.14 lacp actor port priority
- 2.13.15 lacp actor system priority
- 2.13.16 lacp partner admin key
- 2.13.17 lacp partner admin state
- 2.13.18 lacp partner admin state individual
- 2.13.19 lacp partner admin state longtimeout
- 2.13.20 lacp partner admin state passive
- 2.13.21 lacp partner port id
- 2.13.22 lacp partner port priority
- 2.13.23 lacp partner system-id
- 2.13.24 lacp partner system priority
- 2.13.25 port-channel static
- 2.13.26 port lacpmode
- 2.13.27 port lacpmode all
- 2.13.28 port lacptimeout (Interface Config)
- 2.13.29 port lacptimeout (Global Config)
- 2.13.30 port-channel adminmode
- 2.13.31 port-channel linktrap
- 2.13.32 port-channel load-balance
- 2.13.33 port-channel hash multicast
- 2.13.34 port-channel name
- 2.13.35 port-channel system priority
- 2.13.36 show lacp actor
- 2.13.37 show lacp partner
- 2.13.38 show port-channel brief
- 2.13.39 show port-channel
- 2.13.40 show port-channel system priority
- 2.13.41 show port-channel hash multicast
- 2.14 Port Mirroring
- 2.15 Static MAC Filtering
- 2.16 DHCP Snooping Configuration Commands
- 2.16.1 ip dhcp snooping
- 2.16.2 ip dhcp snooping vlan
- 2.16.3 ip dhcp snooping verify mac-address
- 2.16.4 ip dhcp snooping database
- 2.16.5 ip dhcp snooping database write-delay
- 2.16.6 ip dhcp snooping binding
- 2.16.7 ip verify binding
- 2.16.8 ip dhcp snooping limit
- 2.16.9 ip dhcp snooping log-invalid
- 2.16.10 ip dhcp snooping trust
- 2.16.11 ip verify source
- 2.16.12 show ip dhcp snooping
- 2.16.13 show ip dhcp snooping binding
- 2.16.14 show ip dhcp snooping database
- 2.16.15 show ip dhcp snooping statistics
- 2.16.16 clear ip dhcp snooping binding
- 2.16.17 clear ip dhcp snooping statistics
- 2.16.18 show ip verify source
- 2.16.19 show ip source binding
- 2.17 Dynamic ARP Inspection Commands
- 2.17.1 ip arp inspection vlan
- 2.17.2 ip arp inspection validate
- 2.17.3 ip arp inspection vlan logging
- 2.17.4 ip arp inspection trust
- 2.17.5 ip arp inspection limit
- 2.17.6 ip arp inspection filter
- 2.17.7 arp access-list
- 2.17.8 permit ip host mac host
- 2.17.9 show ip arp inspection
- 2.17.10 show ip arp inspection statistics
- 2.17.11 clear ip arp inspection statistics
- 2.17.12 show ip arp inspection interfaces
- 2.17.13 show arp access-list
- 2.18 IGMP Snooping Configuration Commands
- 2.18.1 set igmp
- 2.18.2 set igmp interfacemode
- 2.18.3 set igmp fast-leave
- 2.18.4 set igmp groupmembership-interval
- 2.18.5 set igmp maxresponse
- 2.18.6 set igmp mcrtrexpiretime
- 2.18.7 set igmp mrouter
- 2.18.8 set igmp mrouter interface
- 2.18.9 show igmpsnooping
- 2.18.10 show igmpsnooping mrouter interface
- 2.18.11 show igmpsnooping mrouter vlan
- 2.18.12 show mac-address-table igmpsnooping
- 2.19 IGMP Snooping Querier Commands
- 2.20 MLD Snooping Commands
- 2.20.1 set mld
- 2.20.2 set mld interfacemode
- 2.20.3 set mld fast-leave
- 2.20.4 set mld groupmembership-interval
- 2.20.5 set mld maxresponse
- 2.20.6 set mld mcrtexpiretime
- 2.20.7 set mld mrouter
- 2.20.8 set mld mrouter interface
- 2.20.9 show mldsnooping
- 2.20.10 show mldsnooping mrouter interface
- 2.20.11 show mldsnooping mrouter vlan
- 2.20.12 show mac-address-table mldsnooping
- 2.21 MLD Snooping Querier Commands
- 2.22 Port Security Commands
- 2.23 LLDP (802.1AB) Commands
- 2.23.1 lldp transmit
- 2.23.2 lldp receive
- 2.23.3 lldp timers
- 2.23.4 lldp transmit-tlv
- 2.23.5 lldp transmit-mgmt
- 2.23.6 lldp notification
- 2.23.7 lldp notification-interval
- 2.23.8 clear lldp statistics
- 2.23.9 clear lldp remote-data
- 2.23.10 show lldp
- 2.23.11 show lldp interface
- 2.23.12 show lldp statistics
- 2.23.13 show lldp remote-device
- 2.23.14 show lldp remote-device detail
- 2.23.15 show lldp local-device
- 2.23.16 show lldp local-device detail
- 2.24 LLDP-MED Commands
- 2.24.1 lldp med
- 2.24.2 lldp med confignotification
- 2.24.3 lldp med transmit-tlv
- 2.24.4 lldp med all
- 2.24.5 lldp med confignotification all
- 2.24.6 lldp med faststartrepeatcount
- 2.24.7 lldp med transmit-tlv all
- 2.24.8 show lldp med
- 2.24.9 show lldp med interface
- 2.24.10 show lldp med local-device detail
- 2.24.11 show lldp med remote-device
- 2.24.12 show lldp med remote-device detail
- 2.25 Denial of Service Commands
- 2.26 MAC Database Commands
- 2.27 ISDP Commands
- 2.28 Multicast Handling Commands
- 2.29 Port Bridging Commands
- 3. Quality of Service (QoS) Commands
- 3.1 Class of Service (CoS) Commands
- 3.1.1 classofservice dot1p-mapping
- 3.1.2 classofservice ip-dscp-mapping
- 3.1.3 classofservice trust
- 3.1.4 cos-queue min-bandwidth
- 3.1.5 cos-queue strict
- 3.1.6 traffic-shape
- 3.1.7 show classofservice dot1p-mapping
- 3.1.8 show classofservice ip-precedence-mapping
- 3.1.9 show classofservice ip-dscp-mapping
- 3.1.10 show classofservice trust
- 3.1.11 show interfaces cos-queue
- 3.1.12 show interface cos-counter
- 3.1.13 show packet-memory
- 3.1.14 packet-memory (configure)
- 3.1.15 packet-memory (interface)
- 3.1.16 show protection-group
- 3.1.17 protection-group (configure)
- 3.1.18 protection-group (interface)
- 3.2 Differentiated Services (DiffServ) Commands
- 3.3 DiffServ Class Commands
- 3.3.1 class-map
- 3.3.2 class-map rename
- 3.3.3 match ethertype
- 3.3.4 match any
- 3.3.5 match class-map
- 3.3.6 match cos
- 3.3.7 match secondary-cos
- 3.3.8 match destination-address mac
- 3.3.9 match dstip
- 3.3.10 match dstip6
- 3.3.11 match dstl4port
- 3.3.12 match ip dscp
- 3.3.13 match ip precedence
- 3.3.14 match ip tos
- 3.3.15 match protocol
- 3.3.16 match source-address mac
- 3.3.17 match srcip
- 3.3.18 match srcip6
- 3.3.19 match srcl4port
- 3.3.20 match vlan
- 3.3.21 match secondary-vlan
- 3.4 DiffServ Policy Commands
- 3.5 DiffServ Service Commands
- 3.6 DiffServ Show Commands
- 3.7 MAC Access Control List (ACL) Commands
- 3.8 IP Access Control List (ACL) Commands
- 3.9 IPv6 Access Control List (ACL) Commands
- 3.10 Auto-Voice over IP Commands
- 3.1 Class of Service (CoS) Commands
- 4. Utility Commands
- 4.1 Commands for update and startup Configuration
- 4.2 Dual Image Commands
- 4.3 ATCA commands
- 4.4 System Information and Statistics Commands
- 4.4.1 show arp switch
- 4.4.2 show eventlog
- 4.4.3 show hardware
- 4.4.4 show version
- 4.4.5 show interface
- 4.4.6 show interface ethernet
- 4.4.7 show mac-addr-table
- 4.4.8 show process cpu
- 4.4.9 show running-config
- 4.4.10 show sysinfo
- 4.4.11 show tech-support
- 4.4.12 terminal length
- 4.4.13 show terminal length
- 4.4.14 show boardinfo post-status
- 4.4.15 show boardinfo sensors
- 4.4.16 show boardinfo event-log
- 4.4.17 show boardinfo update-status
- 4.4.18 show boardinfo version
- 4.4.19 show boardinfo address
- 4.4.20 show boardinfo fru
- 4.4.21 show boardinfo ipmidev
- 4.4.22 show boardinfo amc connection
- 4.4.23 show boardinfo amc fru
- 4.4.24 show boardinfo amc ipmidev
- 4.4.25 show boardinfo led
- 4.4.26 show boardinfo cpu-load
- 4.4.27 show boardinfo memory-usage
- 4.5 Logging Commands
- 4.5.1 logging buffered
- 4.5.2 logging buffered wrap
- 4.5.3 logging cli-command
- 4.5.4 logging console
- 4.5.5 logging host
- 4.5.6 logging host remove
- 4.5.7 logging port
- 4.5.8 logging syslog
- 4.5.9 show logging
- 4.5.10 show logging buffered
- 4.5.11 show logging hosts
- 4.5.12 show logging traplogs
- 4.5.13 clear board event-log
- 4.5.14 show logging backtrace
- 4.5.15 show logging errcounter
- 4.5.16 clear errcounter
- 4.5.17 show logging persistent
- 4.6 System Utility and Clear Commands
- 4.6.1 traceroute
- 4.6.2 clear config
- 4.6.3 clear counters
- 4.6.4 clear igmpsnooping
- 4.6.5 clear pass
- 4.6.6 clear port-channel
- 4.6.7 clear traplog
- 4.6.8 clear vlan
- 4.6.9 enable passwd
- 4.6.10 enable passwd encrypted <password>
- 4.6.11 logout
- 4.6.12 ping
- 4.6.13 quit
- 4.6.14 reload
- 4.6.15 reload fast
- 4.6.16 copy
- 4.6.17 delete nvram:extra-profile
- 4.6.18 set bootstopkey
- 4.7 Simple Network Time Protocol (SNTP) Commands
- 4.8 DHCP Server Commands
- 4.8.1 ip dhcp pool
- 4.8.2 client-identifier
- 4.8.3 client-name
- 4.8.4 default-router
- 4.8.5 dns-server
- 4.8.6 hardware-address
- 4.8.7 host
- 4.8.8 lease
- 4.8.9 network (DHCP Pool Config)
- 4.8.10 bootfile
- 4.8.11 domain-name
- 4.8.12 netbios-name-server
- 4.8.13 netbios-node-type
- 4.8.14 next-server
- 4.8.15 option
- 4.8.16 ip dhcp excluded-address
- 4.8.17 ip dhcp ping packets
- 4.8.18 service dhcp
- 4.8.19 ip dhcp bootp automatic
- 4.8.20 ip dhcp conflict logging
- 4.8.21 clear ip dhcp binding
- 4.8.22 clear ip dhcp server statistics
- 4.8.23 clear ip dhcp conflict
- 4.8.24 show ip dhcp binding
- 4.8.25 show ip dhcp global configuration
- 4.8.26 show ip dhcp pool configuration
- 4.8.27 show ip dhcp server statistics
- 4.8.28 show ip dhcp conflict
- 4.9 DHCP Filtering
- 4.10 DNS Client Commands
- 4.11 Serviceability Packet Tracing Commands
- 4.11.1 debug arp
- 4.11.2 debug auto-voip
- 4.11.3 debug clear
- 4.11.4 debug console
- 4.11.5 debug dot1x packet
- 4.11.6 debug igmpsnooping packet
- 4.11.7 debug igmpsnooping packet transmit
- 4.11.8 debug igmpsnooping packet receive
- 4.11.9 debug ip acl
- 4.11.10 debug ip igmp packet
- 4.11.11 debug ip mcache packet
- 4.11.12 debug lacp packet
- 4.11.13 debug mldsnooping packet
- 4.11.14 debug ping packet
- 4.11.15 debug sflow packet
- 4.11.16 debug spanning-tree bpdu
- 4.11.17 debug spanning-tree bpdu receive
- 4.11.18 debug spanning-tree bpdu transmit
- 4.11.19 logging persistent
- 4.12 Cable Test Command
- 4.13 sFlow Commands
- 5. Management Commands
- 5.1 Network Interface Commands
- 5.2 Console Port Access Commands
- 5.3 Telnet Commands
- 5.4 Secure Shell (SSH) Commands
- 5.5 Management Security Commands
- 5.6 Access Commands
- 5.7 User Account Commands
- 5.7.1 users name
- 5.7.2 users name <username> unlock
- 5.7.3 users passwd
- 5.7.4 users passwd <username> encrypted <password>
- 5.7.5 users snmpv3 accessmode
- 5.7.6 users snmpv3 authentication
- 5.7.7 users snmpv3 encryption
- 5.7.8 show users
- 5.7.9 show users accounts
- 5.7.10 passwd
- 5.7.11 passwords min-length
- 5.7.12 passwords history
- 5.7.13 passwords aging
- 5.7.14 passwords lock-out
- 5.7.15 show passwords configuration
- 5.7.16 write memory
- 5.8 SNMP Commands
- 5.8.1 snmp-server
- 5.8.2 snmp-server community
- 5.8.3 snmp-server community ipaddr
- 5.8.4 snmp-server community ipmask
- 5.8.5 snmp-server community mode
- 5.8.6 snmp-server community ro
- 5.8.7 snmp-server enable traps violation
- 5.8.8 snmp-server enable traps
- 5.8.9 snmp-server enable traps linkmode
- 5.8.10 snmp-server enable traps multiusers
- 5.8.11 snmp-server enable traps pll
- 5.8.12 snmp-server enable traps stpmode
- 5.8.13 snmptrap
- 5.8.14 snmptrap snmpversion
- 5.8.15 snmptrap ipaddr
- 5.8.16 snmptrap mode
- 5.8.17 snmp trap link-status
- 5.8.18 snmp trap link-status all
- 5.8.19 show snmpcommunity
- 5.8.20 show snmptrap
- 5.8.21 show trapflags
- 5.8.22 snmptrap notification
- 5.8.23 snmp-server engine-id
- 5.8.24 show snmp-engine-id
- 5.8.25 set board snmp site
- 5.8.26 show boardinfo snmp site
- 5.8.27 set board snmp ipmi-trap
- 5.8.28 set board snmp ipmi-trap interval
- 5.8.29 set board snmp ipmi-trap filter
- 5.8.30 enable (filter)
- 5.8.31 disable (filter)
- 5.8.32 ipmb (filter)
- 5.8.33 type (filter)
- 5.8.34 status (filter)
- 5.8.35 assert (filter)
- 5.8.36 show boardinfo snmp ipmi-trap
- 5.9 RADIUS Commands
- 5.9.1 authorization network radius
- 5.9.2 radius accounting mode
- 5.9.3 radius server attribute
- 5.9.4 radius server host
- 5.9.5 radius server key
- 5.9.6 radius server msgauth
- 5.9.7 radius server primary
- 5.9.8 radius server retransmit
- 5.9.9 radius server timeout
- 5.9.10 show radius
- 5.9.11 show radius servers
- 5.9.12 show radius accounting
- 5.9.13 show radius accounting statistics
- 5.9.14 show radius statistics
- 5.10 TACACS+ Commands
- 5.11 Configuration Scripting Commands
- 5.12 Pre-login Banner and System Prompt Commands
- 5.13 Diagnostics Commands
- 5.14 PCI express Commands
- 5.15 Storage Commands
- 5.16 Clock support commands
- 5.16.1 set board pcie clock
- 5.16.2 set board pll
- 5.16.3 show boardinfo pll status
- 5.16.4 show boardinfo pll config
- 5.16.5 set board clock bpl
- 5.16.6 set board clock mux-amc
- 5.16.7 set board clock mux-bpl
- 5.16.8 set board clock override
- 5.16.9 set board clock receiver
- 5.16.10 set board clock source
- 5.16.11 show boardinfo clock bpl
- 5.16.12 show boardinfo clock amc
- A. Getting Help
- B. FASTPATH Log Messages
- C. List of Commands