Kontron AT8404 CLI - Manual (Page 192)

Quality of Service (QoS) Commands AT8404
AT8404 CLI Reference Manual Page 3 - 18
3.4.4 redirect
This command specifies that all incoming packets for the associated traffic stream are redirected to a specific egress
interface (physical port or port-channel).
3.4.5 conform-color
Use this command to enable color-aware traffic policing and define the conform-color class map. Used in
conjunction with the police command where the fields for the conform level are specified. The <class-map-name>
parameter is the name of an existing DiffServ class map.
3.4.6 class
This command creates an instance of a class definition within the specified policy for the purpose of defining
treatment of the traffic class through subsequent policy attribute statements. The <classname> is the name of an
existing DiffServ class.
Format mirror <slot/port>
Mode Policy-Class-Map Config
Incompatibilities Drop, Redirect
Note: This command is not available on the Broadcom 5630x platform.
Format redirect <slot/port>
Mode Policy-Class-Map Config
Incompatibilities Drop, Mirror
Note: This command may only be used after specifying a police command for the policy-class instance.
Format conform-color <class-map-name>
Mode Policy-Class-Map Config
Note: This command causes the specified policy to create a reference to the class definition.
Note: The CLI mode is changed to Policy-Class-Map Config when this command is successfully
executed.
Format class <classname>
Mode Policy-Map Config