Kontron AT8404 CLI - Manual (Page 245)

AT8404 Utility Commands
Page 4 - 31 AT8404 CLI Reference Manual
4.6.17 delete nvram:extra-profile
This command deletes the extra profile.
4.6.18 set bootstopkey
This command sets the bootstop key. With this key the booting process can be stopped. The key name is “stop”.
This is the default setting.
4.6.18.1 no set bootstopkey
This command resets the bootstop key. The boot process can not be interrupted.
<url> nvram:script
<destfilename>
Downloads a configuration script file to the system.
During the download of a configuration script, the
copy command validates the script. In case of any
error, the command lists all the lines at the end of
the validation process and prompts you to confirm
before copying the script file.
<url> nvram:sshkey-dsa Downloads an SSH key file. For more information,
see 5.4 “Secure Shell (SSH) Commands“ on page
5 - 11.
<url> nvram:sshkey-rsa1 Downloads an SSH key file.
<url> nvram:sshkey-rsa2 Downloads an SSH key file.
<url> nvram:current-
settings
Downloads the file containing current settings to the
system
<url> nvram:extra-profile Downloads the extra-profile “tar.gz” file to the
system
<url> nvram:startup-config Downloads the startup configuration file to the
system.
<url> nvram:all-config Downloads all relevant config files.
<url> {image1 | image2} Download an image from the remote server to
either image.
{image1 | image2} <url> Upload either image to the remote server.
image1 image2 Copy image1 to image2.
image2 image1 Copy image2 to image1.
Format delete nvram:extra-profile
Mode Priviledged EXEC
Format set bootstopkey
Mode Priviledged EXEC
Format no set bootstopkey
Mode Priviledged EXEC
Table 1: Copy Parameters (Continued)
Source Destination Description