Cisco WIRELESS ACCESS POINT WAP4410N - Manual (Page 22)

Setting Up the Cisco WAP4410N Wireless-N Access Point
Navigating the Utility
WAP4410N Wireless-N Access Point with Power Over Internet Administration Guide 22
5
• Log —Configures the log settings.
• Diagnostics —Allows you to perform diagnostic activities, which can be
useful in solving network problems.
• Factory Default —Resets the access point to its factory default settings.
• Firmware Upgrade —Upgrades the access point’s firmware on this screen.
• Reboot —Reboots the access point.
• Configuration Management —Saves and restores access point
configuration.
• SSL Certification Management —Exports or installs an SSL Certificate.
Status
This page allows you to view status information about your local network, wireless
networks, and network performance.
• Local Network —Displays system information, including software and
hardware versions, MAC address, and IP address on the LAN side of the
access point.
• Wireless —Displays wireless network settings including SSID, network
mode, priority setting, VLAN trunk, and wireless channel.
• System Performance —Displays the current traffic statistics of this access
point for both wireless and LAN ports.