Chapter 4, Optional component installation procedures, 4 optional component installation procedures – Kontron NSN2U IP Network Server User Manual

Page 38: 1 before you begin

Advertising
background image

37

4 Optional Component Installation

Procedures

This chapter covers separately-orderable components that you may want to add or

replace in your Kontron IP Network Server NSN2U. Most of these components can be

ordered as accessories from Kontron and some are from third party vendors. For more

information about what is available from Kontron, see the IP Network Server NSN2U

Configuration Guide

. For a list of qualified third party vendors, see the Tested

Hardware and Operating System List

(THOL). The latest version of the Configuration

Guide is located on the Kontron support website at

http://us.kontron.com/support/

(search for NSN2U, click on Product Downloads, then Ordering Guide). The latest

version of the THOL is located on the support website at

http://us.kontron.com/support

(search for NSN2U, click on Product Downloads, then Compatibility Matrix).

4.1 Before You Begin

Before working with your server product, pay close attention to the safety

instructions provided in this manual. See Appendix A: Safety Information

.

Warning: Electrostatic discharge (ESD) and ESD protection: ESD can damage disk drives,

boards, and other parts. We recommend that you perform all procedures in this

chapter only at an ESD workstation. If one is not available, provide some ESD

protection by wearing an antistatic wrist strap attached to chassis ground (any

unpainted metal surface) on your server when handling parts.

Tools and Supplies Needed

#1 and #2 Phillips (cross-point) screwdrivers (or interchangeable tip screwdriver

with #1 and #2 Phillips bits)

Personal grounding device such as an anti-static wrist strap and a grounded

conductive pad

System References

All references to left, right, front, top, and bottom assume that you are facing the

front of the server, as it would be positioned for normal operation.

Cable Routing Reference

It is important for cables to be connected correctly. See Figure 24 and Table 4 for

cable routing and for more detailed information, see the Kontron IP Network Server

NSN2U Technical Product Specification

.

Advertising