3 what your server includes, 4 product accessories – Kontron NSN2U IP Network Server User Manual
Page 8
7
1.3 What Your Server Includes
Your NSN2U server includes the following components:
•
One 2U chassis
•
One Intel® Server Board T5520UR with DDR3 memory slots (memory not included)
•
Four internal hard drive carriers and four filler panels in a removable drive bay
assembly with a SAS/SATA backplane board
•
One DC or AC power subsystem: one hot-swappable power supply module and a power
distribution board. (A filler panel is in the other power supply bay. For redundancy
another separately orderable power supply module must be added.)
•
Six fan assemblies for cooling the processor(s), DIMM(s), PCI slot(s), and other
internal components in three cooling zones.
•
A front panel board and LED/switch board
•
Internal cables and connectors
•
See Chapter 3 for initial installation and configuration instructions.
1.4 Product Accessories
The following list shows the separately orderable components and optional accessories
available for inclusion in the initial order or to have as spares. Refer to the IP
Network Server NSN2U Configuration Guide
for a complete list of orderable spares and
options. The Configuration Guide can be found on the Kontron Support Website at
(search for NSN2U, click on Product Downloads, then
Ordering Guide).
•
Quad-core processor(s) from the Intel
®
Xeon
®
processor 5500 series and appropriate
heat sink(s)
•
RDIMM/UDIMM DDR3 memory
•
SAS or SATA hard disk drives (system maximum = eight HDDs)
•
Hard disk drive carriers (four are provided with the server in drive bays 0 -- 3)
•
SAS/SATA control module for basic hard drive support
•
Hardware RAID 5 and 6 kit
•
Optional battery backup (IBBU) for hardware RAID
•
SATA optical drive
•
SMART* Z-U130 solid state drive
•
2U PCIe active “butterfly” riser (three full-height/full-length PCIe slots and two
low-profile PCIe slots
•
2U PCIe/PCI-X active “butterfly” riser (two full-height PCI-X 133 slots, one full-
height/full-length PCIe slot, and two low-profile PCIe x4 slots)
•
2U PCIe passive riser (three full-height/full-length PCIe slots)
•
Power cord(s)
•
AC or DC power supply module (600W) for redundancy
•
GCM4 network interface module to enable Intel
®
Remote Management Module 3(RMM3)
functionality
•
I/O expansion module for dual port 10GbE, quad port GbE, or 4xSAS external drive
support
•
Rack mount kits
For information about the accessories, memory, processors, and ordering information,
refer to the IP Network Server NSN2U Configuration Guide on
Ordering Guide).