Mercedes-Benz S-Coupe 2015 - Manual (Page 130)

Replacing the wiper blades
Moving the wiper arms to a vertical posi-
tion
On vehicles without KEYLESS-GO:
X
Turn the SmartKey to position 0 in the igni-
tion lock (
Y
page 147).
X Set the windshield wiper to the ° posi-
tion.
X
Turn the SmartKey to position 1 in the igni-
tion lock (
Y
page 147).
X As soon as the wiper arms are vertical to
the hood, turn the SmartKey to position 0 in
the ignition lock (
Y
page 147).
X Remove the SmartKey.
X Fold the wiper arms away from the wind-
shield until you feel them snap into place.
On vehicles with KEYLESS-GO:
X
Switch off the engine.
X
Remove your foot from the brake pedal.
X
Set the windshield wipers to position °.
X Press the Start/Stop button repeatedly
until the windshield wiper starts.
X
When the wiper arms have reached the ver-
tical position, press the Start/Stop button
repeatedly until the windshield wipers stop.
X Fold the wiper arms away from the wind-
shield until you feel them snap into place.
Removing a wiper blade
X
To bring the wiper blade into position to
be removed: hold the wiper arm firmly with
one hand. With the other hand, turn the
wiper blade in the direction of arrow :
beyond the point of resistance.
The wiper blade engages in the removal
position with an audible click.
X To remove a wiper blade: firmly press
release knob ; and pull the wiper blade
upwards =.
Installing the wiper blades
X
Push the new wiper blade in the direction of
arrow : onto the wiper arm until tab ;
engages.
X
Push the wiper blade out of the removal
position in the direction of arrow = beyond
the point of resistance.
The wiper blade disengages with an audible
click and is freely movable again.
X
Make sure that the wiper blade is seated
correctly.
X Fold the wiper arm back onto the wind-
shield.
128
Windshield wipers
Li
ghts
and
wi
ndsh
ie
ld
wi
pers