On-board computer and display s, Menus and submenus – Mercedes-Benz S-Coupe 2015 User Manual
Page 246
The selected unit of measurement for dis-
tance applies to:
R
Speedometer
R
Digital speedometer in the
Trip
Trip
menu
R
Additional speedometer in the status area
on the multi-function display
The unit in the additional speedometer is
displayed inversely to the selected dis-
tance unit.
R
Odometer and the trip odometer
R
Trip computer
R
Current consumption and the range
R
Navigation instructions in the
Navi
Navi
menu
R
Cruise Control
R
SPEEDTRONIC
R
DISTRONIC PLUS
R
ASSYST PLUS service interval display
Selecting the permanent display function
With the
Permanent Display
Permanent Display
function you
can switch on the outside temperature in the
status bar of the multifunction display.
X
Use ò on the steering wheel to call up
the list of menus.
X
Press the : or 9 button on the steer-
ing wheel to select the
Settings
Settings
menu.
X
Confirm by pressing a on the steering
wheel.
X
Press the : or 9 button to select the
Instrument Cluster
Instrument Cluster
submenu.
X
Press a to confirm.
X
Press : or 9 to select the
Perma‐
Perma‐
nent Display
nent Display
function.
X
Press a to confirm.
The current setting for
Outside Temper‐
Outside Temper‐
ature
ature
is displayed.
X
To change the setting: press a.
Switching the additional speedometer
on/off
Use the
Additional Speedometer
Additional Speedometer
function
to choose whether the status area in the mul-
tifunction display shows the speed digitally.
X
Use ò on the steering wheel to call up
the list of menus.
X
Press the : or 9 button on the steer-
ing wheel to select the
Settings
Settings
menu.
X
Confirm by pressing a on the steering
wheel.
X
Press the : or 9 button to select the
Instrument Cluster
Instrument Cluster
submenu.
X
Press a to confirm.
X
Use : or 9 to select the
Addi‐
Addi‐
tional Speedometer
tional Speedometer
function.
The current selection is displayed.
X
To activate/deactivate: press the a
button again.
Restoring the factory settings
X
Use ò on the steering wheel to call up
the list of menus.
X
Press the : or 9 button on the steer-
ing wheel to select the
Settings
Settings
menu.
X
Confirm by pressing a on the steering
wheel.
X
Press the : or 9 button to select the
Factory Settings
Factory Settings
submenu.
X
Press a to confirm.
The
Reset All Settings?
Reset All Settings?
message
appears.
X
Press the : or 9 button to select
No
No
or
Yes
Yes
.
X
Press a to confirm the selection.
If you have selected
Yes
Yes
, the multifunction
display shows a confirmation message.
For safety reasons, the
Daytime Running
Daytime Running
Lights
Lights
function in the
Lights
Lights
submenu is
only reset if the vehicle is stationary.
244
Menus and submenus
On-board
computer
and
display
s