Ope ni ng and cl os in g, Smartkey – Mercedes-Benz S-Coupe 2015 User Manual

Page 82

Advertising
background image

X

To unlock the vehicle: touch the inner

surface of the door handle.

X

To lock the vehicle: touch sensor sur-

face : or ;.
Make sure that you do not touch the inner

surface of the door handle.

X

Convenience closing feature: touch

recessed sensor surface ; for an exten-

ded period.
Further information on the convenience

closing feature (

Y

page 95).

Deactivating

If you do not intend to use the vehicle for a

longer period of time, you can deactivate KEY-

LESS-GO. The SmartKey will then use very lit-

tle power, thereby conserving battery power.

For the purposes of activation/deactivation,

the vehicle must not be nearby.

X

To deactivate: press the & button on

the SmartKey twice in rapid succession.

The battery check lamp of the SmartKey

lights up twice briefly and KEYLESS-GO is

deactivated.

X

To activate: press any button on the

SmartKey or insert the SmartKey into the

ignition lock.

KEYLESS-GO and all of its associated fea-

tures are available again.

KEYLESS-GO start function

Bear in mind that the engine can be started by

any of the vehicle occupants if there is a

SmartKey in the vehicle.

Changing the settings of the locking

system

You can change the settings of the locking

system. This means that only the driver's door

and the fuel filler flap are unlocked when the

vehicle is unlocked. This is useful if you fre-

quently travel on your own.

X

To change the setting: press and hold

down the % and & buttons simulta-

neously for approximately six seconds until

the battery check lamp flashes twice

(

Y

page 82).

i

If the setting of the locking system is

changed within the signal range of the vehi-

cle, pressing the & or % button:

R

locks or

R

unlocks the vehicle

The SmartKey now functions as follows:

X

To unlock the driver's door: press the

% button once.

X

To unlock centrally: press the % but-

ton twice.

X

To lock centrally: press the & button.

The KEYLESS-GO function is changed as fol-

lows:

X

To unlock the driver's door: touch the

inner surface of the door handle on the

driver's door.

X

To unlock centrally: touch the inner sur-

face of the front-passenger door handle.

X

To lock centrally: touch the outer sensor

surface on one of the door handles.

X

To restore the factory settings: press

and hold down the % and & buttons

simultaneously for approximately six sec-

80

SmartKey

Ope

ni

ng

and

cl

os

in

g

Advertising